Hot Selling Laser Cutting Nitrogen Generator

   Stable flow rate and controllable purity

   The airflow is stable, and nitrogen can reach equilibrium pressure after being stored in the gas storage tank;

   Purity is controllable, and the nitrogen production process is controlled by the PSA operating program with various auxiliary controls added. The flow      rate can be measured and adjusted as needed, and the purity accuracy is controlled within ± 1%.

  Product model XRFD-0100S:

When the purity is set at 90%, the flow rate is about 100Nm3/h;

When the purity is set at 95%, the flow rate is about 60Nm3/h;

When the purity is set at 99%, the flow rate is about 30Nm3/h;

When the purity is set at 99.9%, the flow rate is about 10Nm3/h;

Fully covering the cutting needs of commonly used boards, equipped with up to 7 working modes

Carbon steel thick plate mode, carbon steel thin plate mode, aluminum alloy thick plate mode, aluminum alloy thin plate mode (burr free cutting process), stainless steel thick plate mode, stainless steel thin plate mode; According to the cutting needs of different materials, different working modes can be selected to meet different cutting effects; The auxiliary gas supply system can also serve as a gas source for air cutting of ultra-thick plates to meet the cutting needs of high-power laser ultra-thick plates.