180Nm3 Multi-functional Membrane N2 Generator
XRFD-0180M
Used for laser cutting equipment of one 40kW or above
Kinder reminder: the multifunctional laser cutting nitrogen generator serves as an auxiliary gas supply equipment. The thickness and quality of sheet metal cutting depend on the power of the laser equipment, machine performance, and optical configuration (such as laser and cutting head configuration)
Sr# | Item | Indicators | Remarks: |
1 | N2 flow rate | 180Nm³/h | Rated flow rate of nitrogen varies with nitrogen purity |
2 | N2 purity | 90-99% |
3 | N2 outlet pressure | 1.4±0.1MPa | |
4 | Dew point: | ≤-40℃ | Meet the requirements of high-power laser cutting |
5 | Nitrogen dust filter diameter | 0.01um |
6 | Oil content in N2 | ≤0.003ppm |
7 | Total power | <60kw | Power for the whole package |
8 | Designed service life | 10years |
Public engineering facilities and consumption |
Air compressor | Rated Power 55kw 380V/50Hz Three phase four wire system (recommended to use 25mm2 wire) |
Refrigeration dryer | Rated power 2.4kw 1PH/AC220V/50Hz (≥1.5mm2, 1.5mm2 power line suggested) |
Membrane N2 generator | Rated power 3.0kw 1PH/AC220V/50Hz (≥1.5mm2, 1.5mm2 power line suggested) |
Either HPD Dryer or adsorption dryer | Rated power 0.06kw 1PH/AC220V/50Hz (≥1.5mm2, 1.5mm2 power line suggested) |
Operating environment: | Max temp<40℃,Min temp>-15℃,Max humidity<80% |
Characteristics:
◎Adopting a fully enclosed refrigeration compressor, super cooling, stable operation, low noise, reliable performance, and long service life;
◎The equipment structure is designed reasonably, easy to maintain, and has a box shaped appearance, which is beautiful and generous;
◎Enlarge the heat transfer area of the evaporator to improve heat transfer efficiency and ensure the stability of the machine's dew point;
◎A specially designed cold and heat exchanger that perfectly utilizes the heat exchange between the outlet cold source and the inlet hot air. To avoid condensation in pipelines and achieve more energy-efficient results.
◎The high-efficiency gas-water separation device, combined with a well-designed drainage system, is not clogged and comes with a filter that can be cleaned regularly to continuously and stably discharge condensate water from the machine;